Instructions

WobL+ How To Set Time and Functions

WobL+ features large buttons to make setting time/day/date and alarms and functions easy to manage. Settings may be locked for convenience and security.

WobL+ watch faces showing functions and buttons.

How to Set Time/Day/Date

  • Press and hold MODE button for approx. 3 seconds.
  • Press and release SET button until AM or PM is flashing as desired.
  • Press SAVE button.
  • Press and release SET button until desired hour is flashing.
  • Press SAVE button.
  • Press and release SET button until desired minutes are flashing.
  • Press SAVE button.
  • Seconds will continue counting down.
  • Press and release SET button until desired month is flashing (top of screen).
  • Press SAVE button.
  • Press and release SET button until desired day is flashing (top of screen).
  • Press SAVE button.
  • Press and release SET button until desired year is flashing (top of screen).
  • Press SAVE button.

How to Lock Settings

  • Press and hold both SET and SAVE buttons simultaneously for approximately 3 seconds.
  • A small padlock symbol will appear on the screen.
  • Press and hold both SET and SAVE buttons simultaneously for approximately 3 seconds to unlock the settings.

How to Use Stopwatch

  • Press and release MODE button one time. Stopwatch will appear and clock will set to 0:00.
  • Press SET button to start timer.
  • Press SET button to stop timer.
  • Press CLEAR button to clear timer and reset to 0:00.
  • Press and release MODE button three times to return to time and date.

How to Set Countdown Timer

The Countdown timer has an auto-repeat function until disengaged, making it useful for repeated reminders at consistent intervals throughout the day and/or night. To set the Countdown timer, first decide these steps:

  • What time of day do you want the countdown to begin; for example, 8:00 a.m.
  • What time of day to you want the countdown to stop; for example, 8:00 p.m.
  • What interval of time do you want counted down between alarms; for example, 90 minutes.

Follow these steps to set a timer to alert every 90 minutes between 8 a.m. and 8 p.m.:

  • Press MODE button two times. “Countdown” will appear and clock will set to 0:00.
  • Press and hold MODE button until “Start” “Countdown” and 12 begin flashing, approx. 3 seconds.
  • Press and release SET button until hour displays 8. Note that AM will be flashing on the left side of the numbers when you start.
  • Press SAVE button. The minutes will begin flashing.
  • Press SAVE button again to save at 8:00 a.m.
  • If you want to set a different minutes start time, such as 8:30 a.m., press and release the SET button until :30 displays for minutes.
  • Press SAVE button.
  • “Stop” “Countdown” and 12 begin flashing.
  • Press and release SET button until hour displays 8. Note that AM will be flashing on the left side of the numbers; press SET button until you advance past 12 to change this to PM.
  • Press SAVE button; remember, make sure to advance past 12 until PM is displayed.
  • “Int” and “Countdown” begin flashing. Set the interval of time between alarms. To set 90 minutes, or 1 hour and 30 minutes, press and release SET button until 1 appears in the hour position.
  • Press SAVE button.
  • “Int” “Countdown” and minutes will be flashing
  • Press and release SET button until 30 appears in the minute position.
  • Press SAVE button.
  • The vibration indicator (looks like a tiny lightning bolt) will be flashing on the right above the minutes. To save as a vibration alert only, press SAVE button.
  • To change to audible alert (the indicator looks like two right parentheses close together) or to set both vibration and audible alerts, press and release SET button to display one or both symbols on the screen.
  • Press SAVE button.
  • The watch will display time and date, and immediately give the vibration and/or audible alert tone 5 times to confirm that the countdown timer has been set.  It will alarm again at the next set countdown interval.
  • To stop an alert, press and release CLEAR button.
  • To clear the countdown alarm altogether, press and release MODE button two times until Countdown appears on the screen.
  • Press and hold MODE button until the screen begins to flash.
  • Press and hold CLEAR button until screen resets to current time and date.
  • When a countdown timer has been set, the word Countdown will be displayed at the bottom of the watch face.
  • While a countdown timer is set and active, you can confirm the time until it next alerts by pressing and releasing MODE button two times, until the Countdown appears on screen. The time counting down to the next alert will be displayed for a few seconds.
  • If an alert goes off and cannot be turned off, or if you find you cannot reset your countdown alarm, it is time for a new battery.  Battery life depends on the frequency of alerts and the use of audible and vibration alarms.

On the first day, the alert times may be slightly off depending on when the alarm was created.  For example, if you set the alarm to repeat at an interval of one hour from 8 a.m. to 8 p.m., but you program the alarm at 8:15 a.m., it will alert at 15 minutes past each hour for that day only. It will begin the second day at 8 a.m. and repeat at the top of each hour within the Start-Stop range.

How to Set Individual Alarms

WobL+ watch features 9 individually programmable alarms. These unique alarms are great for one-time or daily events, such as meetings, reminders to check blood sugar, or for other important but not necessarily repeating reminders or alerts.

  • Press and release MODE button three times until Alarm and 1 appear at the bottom of the screen and the time is displayed as -:–.
  • Press and hold MODE button until Alarm and 1 begin flashing.
  • Press and release SET button to choose alarm number, 1 to 9.
  • Press SAVE button.
  • Press and release SET button to display desired hour.
  • Press SAVE button.
  • Press and release SET button to display desired minutes.
  • Press SAVE button.
  • Press and release SET button to display vibration, audible, or both alert settings.
  • Press SAVE button.
  • When all alarms have been set as desired, press and hold MODE button until time and date are displayed.
  • When alarms are in use, the word Alarm will be displayed at the bottom of the watch face.
  • To stop an alert, press CLEAR button.
  • To delete one alarm, press MODE three times until only Alarm is displayed on the watch face.
  • Press and hold MODE button.
  • Press and release SET button to display alarm number you want to delete, if using multiple alarms.
  • Press and release CLEAR button to delete displayed alarm.
  • Press and hold CLEAR button to delete all set alarms.
  • Press and hold MODE button to return to time and date.
  • If an alert goes off and cannot be turned off, if you find you cannot reset your alarms, it is time for a new battery.  Battery life depends on the frequency of alerts and the use of audible and vibration alarms.

How to Replace the Batteries

To release the battery from its housing, use a small, flat-head screwdriver to push this white ridge away from the battery. Be sure to insert the new battery + side up.

Detailed instructions: release watch from band, remove back, release and replace battery.